1. this series of gear pumps and motors have 4 sizes. The flow rate is 108lpm and the maximum pressure is 250bar.
It can be combined in multiple connection with a series of assembling types of mandrels, flanges and oil inlet and outlet conforming to SAE, DIN and European standards.
2. Finished high tensile aluminum extrusion alloy body and die casting front and rear cover ensure high volumetric efficiency, mechanical efficiency and low noise characteristics.
3.Viton oil seal parts can withstand high temperature operation.
4. special oil free bearing design can operate under high pressure.
5. can be positive, reverse, positive and negative.
6. the synchronous motor can be combined to achieve the purpose of synchronous control of multiple cylinders.
The accuracy of synchronization is 95%, which is 70% better than that of general shunt valves.
DFM-302A-4-10 DFM-302A-6-10
DFM-302A-8-10 DFM-302A-11-10
DFM-303A-25-10 DFM-303A-28-10
DFM-304A-13-10 DFM-304A-14-10
DFM-302A-13-10 DFM-302A-14-10
DFM-302A-17-10 DFM-302A-19-10
DFM-302A-23-10 DFM-302A-25-10
DFM-302A-28-10 DFM-302A-30-10
DFM-302A-35-10 DFM-303A-4-10
DFM-303A-6-10 DFM-303A-8-10
DFM-303A-11-10 DFM-303A-13-10

DFM-303A-30-10 DFM-303A-35-10

DFM-304A-4-10  DFM-304A-6-10
DFM-304A-8-10  DFM-304A-11-10

DFM-303A-14-10 DFM-303A-17-10
DFM-303A-19-10 DFM-303A-23-10

DFM-304A-17-10 DFM-304A-19-10

DFM-304A-23-10 DFM-304A-25-10
DFM-304A-28-10 DFM-304A-30-10

DFM-304A-35-10

DFM-303A-30-10 DFM-303A-35-10
DFM-304A-4-10  DFM-304A-6-10
DFM-304A-8-10  DFM-304A-11-10
DFM-303A-14-10 DFM-303A-17-10
DFM-303A-19-10 DFM-303A-23-10
DFM-304A-17-10 DFM-304A-19-10
 DFM-304A-23-10 DFM-304A-25-10
DFM-304A-28-10 DFM-304A-30-10
DFM-304A-35-10